Arrow Filling Machine
- Arrow-pet
triblocks- for rinsing, filling and capping PET bottles
- Arrow-pet triblocks are
fully automatic, needing only a single
operative to refill caps in the hopper
- Arrow-pet triblocks fill
a great variety of
soft drinks, sparkling
water and natural water into bottles up to 2 litres
Construction
- The supporting
structure
(base & plate) is
of constructional steel, with stainless steel AISI 304 used
for
the guards
- Under the base are
fixed drivers
- On the plate are:
-
- Systems of worms
and stars
- Rinser with grips table
- Filler with valves table
- Tank with valves
- Capper with
capping heads
- Caps transfer system
of caps
|
Process
-
Bottles are transfered by the air elevator to the rinser
- Bottles are separated by the worm while moving towards the first
star
- The first star transfers each bottle into a neck-grip on the rinser - which are synchronised with the moving plane cam
- The grip closes and the bottle is transfered onto the rodding cam
- The bottle is then turned bottom up and washed with water
- The bottle is returned to bottom down position, and the grip holding
the bottle opens
- Bottles are seperated by the second worm while being transferred to
the filler
- The bottle moves through the middle star-wheel to a position
directly under a filling valve
- The feeder then raises up the bottle so as its mouth is on the valve
- A sensor next to the valve sends a command to the servo-motor to open the
valve - bottles are then aereted to a level pressure between the inside
and outside of the bottle
- After leveling of the pressures, gravity filling of the liquid into
the bottle begins
- The level to which the bottle is filled, depends on the length of the
valve tube
- The bottle is de-aerated and moved by the middle star and the
bottle is capped from the end of skid of the capping machine
- The capping head is moved down onto the cam with a
simultaneous rotation
- The bottle is then closed with the cap
- The closed bottle is then moved by
the exit star to the conveyor belt
- Caps are orientated in the hopper and are moved
to the skid as the final process
|
Technical Details
|
| Model |
Rinser |
Filler |
Capper |
Speeds (bph)
(1.5ltr)
|
Cap Feed Elevator
|
| Arrow
PET 8/12/1
|
8
|
12
|
1
|
1500 |
Mechanical
Unscrambler
|
| Arrow
PET 16/24/6
|
16 |
24
|
6
|
3350
|
Mechanical
Unscrambler
|
| Arrow PET 18/36/8
|
18
|
36
|
8
|
6000 |
Sided
Cap Feed Elevator
|
| Arrow PET 24/48/8
|
24
|
48
|
8
|
8500
|
Sided
Cap Feed Elevator
|
| Arrow PET 30/60/12
|
30
|
60
|
12
|
10000 |
Mechanical
Unscrambler
with
Pneumatic Cap Feed Elevator
|
Equipment
Every Machine
is:
- Prepared for CIP
- Arranged for one type of bottle
and cap
- Fitted with a 1 meter pneumatic
conveyor at entrance
- Fitted with entrance and exit
photocell
- Up
to 24 valve cap
feeder
available
|
|
